 | | Id: 287 - Siat S2-S Shrink-Heat-Tunnel-Sealer
Siat Carton Sealer with Case Printer - SOLD
Model S2-S
Part No: SEB0000149
Serial No: 51101
Volt: 415
Amp: 1.08
0.26kW - 3 Phase
Year 2005
PAT Test expires Feb 2008
In Good working condition
SOLD
|
|
 | | Id: 504 - Yang Perseus Shrink-Heat-Tunnel-Sealer
Yang Perseus CAP Tray Sealer
Year 2005
This will include an amount of trays for each tooling
In very good condition.
Please contact us for further details
|
|
 | | Id: 589 - Packaging Equipment FL 5545 Shrink-Heat-Tunnel-Sealer
Shrink Wrapper by Packaging Equipment
Manual Wrapping machine
Model FL5545 - with approx 12" width capacity
Comes with Heat Tunnel
Model SM-452S - Aperture 10" x 15" wide
Both Year 2002
In Good condition.
Please contact us for further details
|
|
 | | Id: 590 - Pester Pewo Therm 11 Shrink-Heat-Tunnel-Sealer
Heat Tunnel by Pester
Type: Pewo Therm II Heated Tunnel
Aperture Approx. 10" x 20" inches wide
Good condition
Please contact us for further details
|
|
 | | Id: 603 - Soco T-100 Shrink-Heat-Tunnel-Sealer
Soco Case Taper
Year 2000
Maximum output 30/min.
Format range: l x w x h (minimum) 160 x 90 x 90.
L x w x h (maximum) unlimited x 520 x 505 mm.
Please contact us for price details
|
|
 | | Id: 703 - Franco Pack MGF 119 Shrink-Heat-Tunnel-Sealer
Franco Pack Bag Sealer
Model - MGF 119
For sealing various sized pre-formed bags for Tea, coffee, sugar and many other products.
Please contact us for details
|
|
 | | Id: 705 - Europack Shrink-Heat-Tunnel-Sealer
Europack Shrink Wrapper and Tunnel
Serial Number 16167
Europack machine model 8805
- Way of working from left to right
- Maximum product width 200 mm
- Welding legnth 620 mm approx
- Maximum film reel 800 mm approx
- Film reel is motorized
- Shrinking tunnel with metal belt
Length = 1600 mm ; Width = 730 mm ; Max. height = 350 mm
Machine is 3 x 380 V + Neutral - 50 Hz - 15 Amp
Shrinking tunnel is 3 x 380 V + Neutral - 50 Hz - 35 Amp
Overall size 4500 x 2100 x 2000 mm
In good condition
Please contact us for details
|
|
 | | Id: 707 - Franco Pack Shrink-Heat-Tunnel-Sealer
Bag Sealer
Manufacturer - Franco Pack
Comes with support rail for the bags as they pass through and are sealed.
In very nice condition.
Painted finish in silver/grey
For sealing various sized pre-formed bags
Please contact us for price details
|
|
 | | Id: 713 - TBA Induction Sealer Shrink-Heat-Tunnel-Sealer
Induction Sealer
For plastic bottles or jars.
Places a tamper evident foil seal over the nck of the container prior to it being capped.
In very good condition.
Please contact us for details
|
|
 | | Id: 762 - Ilpra Big Mec V/G Shrink-Heat-Tunnel-Sealer
Ilpra Big Mec V/G Traysealer
Year 2002
Comes with 2 tools for tray size 195 x 142 mm and 227 x 178 mm (see attached pic of trays)
4 trays per cycle
Excluding vacuum pump
Please contact us for further details
|
|
 | | Id: 805 - Little David Case Taper Shrink-Heat-Tunnel-Sealer
Little David Case Taper
Model - LD7 C
Top & Bottom Case Taper.
In good condition, but requires a New Reel Holder/Cartridge.
Last Electrically tested & passed in 200.
Price to clear - £300+VAT Ex.works UK
Please contact us for details
|
|
 | | Id: 846 - Graham Labelling & Sleeving RF80 Shrink-Heat-Tunnel-Sealer
Grahams RF80 Shrink Sleeve/Band Applicator
Sleeve / band size;
Layflat (Flatted tube) -165mm max
Cut sleeve/band length -25mm min to 150 max
material thickness 40-75 micron
Product diameter 30 to 102 mm
Spool diameter 300mm
Core size 76mm
Machine dimensions
- 850mm deep
1100mm wide
2100mm max height
service requirements;
Voltage 240v
Frequency 50/60 HZ
Power 12.0 amps
Air 550-828 (80-120 p.s.i.) . 028 cu mt/min
This was set-up IN 2009 to fit a tamper evident band over a plastic cylinder, but could be used for full body shrink sleeves if required.
Several new parts fitted in 2009.
In very good condition.
Please contact us for further details.
|
|
 | | Id: 977 - Pactur TL60 Shrink-Heat-Tunnel-Sealer
Pactur TL60 Shrink Oven
Year of Manufacture: 1996
Height: 1180mm
Width: 2070mm
Depth: 720mm
14.6amp
10.5kw
50hz
415 volt
a/c Please contact us for further details
|
|
 | | Id: 998 - Smipack S560 Shrink-Heat-Tunnel-Sealer
Smipack Shrink Foil Machine
· Year of manufacture: 05/1999
· Model: S560
· Serial Number: 3371
· Power consumption: 3600 W / 50Hz /18A
. 4 unused reels of foil are included.
· Sealing Bar width.: 57 cm long /42 deep
Please contact us for further details
|
|
 | | Id: 1120 - Nortan Shrink-Heat-Tunnel-Sealer
Nortan shrink sleeving machines for bottles and jars - brand new
A printed heat-shrinkable sleeve made of PVC film by means of thermal head.
This bottle sleever was destined to operate in a bottling
line producing pasteurized milk in PE bottles. It can be used for all bottle types.
Make: Nortan
Type: Nortan 35
Maxmimum capacity: 3000 bottles / hour
Year of make: 2008
Working hours: 0
Condition: new, never in operation
Machine dimensions: 3500 x 1350 x 1950 mm
Machine weight : 4500 kg
BRAND NEW
Please contact us for further details
|
|
